C8 Non-Ionic Textile Finishing Agent FE-8006V

Short Description:

Fluorocarbon high polymer emulsion based on C8 structure

Very low surface tension, imparts good water repellency, to the fabric

Co-bath with water borne polyurethane, water-based acrylate anionic type material

Good continuity and less affect to the color fastness and color shade

Good adaptability to work fluid and low affect to the anionic processing condition

High peel strength and bond fastness, good performance to the coating processing

Send email to us

Product Detail

Product Tags

Characteristics：

Appearance: Yellowish translucent lotion
Solid content: 30%
Ionicity: non-ionic
PH value:3-5
Solubility: Dispersible in water at any proportion

Reference Dosage：

Polyester fabric: 20g/L~45g/L (170℃×1min)
Nylon fabric: 25g/L~50g/L (170℃×1min)
Polyester-cotton fabric: 25g/L~70g/L (170℃×2min)

Precautions：

1.Before mixing with other additives, the compatibility should be confirmed through preliminary tests.
2. When there are hydrophilic substances left in the previous processing on the processing cloth, the processing effect will be affected, so the cloth before waterproof and oil-proof processing must be cleaned; Baking must be sufficient during processing.
3. If baking is required during processing, the baking should be sufficient, otherwise it will affect its performance.
4. Please use up the working fluid containing waterproofing agent and mixed chemicals within 12 hours. The stability and performance of the working fluid left for a long time must be confirmed before use.
5. Please use it as soon as possible after opening, and pay attention to sealing to prevent evaporation and avoid open flames and direct exposure to the sun.
6. The storage temperature is between 5℃~ 40℃ and avoid freezing.

Previous: Three proof finishing agent FE-8005P (C8)

Next: Spray waterproof agent M-Z00D (C0)

For various textile