Spray waterproof agent M-Z00D (C0)

Characteristics：

Appearance: Milky white liquid
Solid content: 24%
Ionicity: weak cation
PH value:5-6
Solubility: Insoluble

Reference Dosage：

It is recommended to dilute 10% -20% into the recommended diluting solvent, and then put it into a spray tank or spray gun for use.
When there are residual hydrophilic substances on the processed substrate, it will affect the processing effect. Before finishing, the substrate must be cleaned thoroughly;
After processing, place the finished substrate in a dry and ventilated environment to dry, otherwise it may affect its effectiveness;
Please use the working fluid containing waterproofing agent and compounding agent within 12 hours. The working fluid that has been stored for a long time must be confirmed for stability and performance before use.

Precautions：

1.Before mixing with other additives, the compatibility should be confirmed through preliminary tests.
2. When there are hydrophilic substances left in the previous processing on the processing cloth, the processing effect will be affected, so the cloth before waterproof and oil-proof processing must be cleaned; Baking must be sufficient during processing.
3. If baking is required during processing, the baking should be sufficient, otherwise it will affect its performance.
4. Please use up the working fluid containing waterproofing agent and mixed chemicals within 12 hours. The stability and performance of the working fluid left for a long time must be confirmed before use.
5. Please use it as soon as possible after opening, and pay attention to sealing to prevent evaporation and avoid open flames and direct exposure to the sun.
6. The storage temperature is between 5℃~ 40℃ and avoid freezing.